UNO-PS/1AC/48DC/60W - PHOENIX CONTACT - Hardened Industrial Power Supply DIN-Rail 48V 60W 1.25A AC/DC 2902995
UNO-PS/1AC/48DC/60W - PHOENIX CONTACT - Hardened Industrial Power Supply DIN-Rail 48V 60W 1.25A AC/DC 2902995
SKU:UNO-PS/1AC/48DC/60W
PHOENIX CONTACT - UNO-PS/1AC/48DC/60W - 2902995
This Industrial Power Supply is a rugged AC to DC Converter built to meet the high stability and efficiency expectations of industrial, machine automation and process control environments. This Switching (switch mode) Power Supply ensures a regulated output voltage even in the event of voltage fluctuations in the power supply network. With all required safety certifications to support ITE (Information Technology Equipment), ruggedized packaging, extended operating temperatures, high peak load capabilities and high isolation voltages, the UNO Industrial Power Supply is designed to meet the needs of your industrial application.
With the NEC designation as a Class 2 Power Supply, all regulations address the wiring requirements (wire size and insulation, wire derating factors, over-current protection limits and methods of wiring installation) between the output of the supply and the input of the load are met by the UNO-PS/AC. The output voltage and power delivery capabilities of this Class 2 power supply will lower the risk of fire initiation and electrical shocks, which allows for lower cost wiring methods to be employed when installing an electrical system in a building.
Industrial Operating Temperature of -25°C to 70°C (-13°F to 158°F)
Equipment found in traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications must function in temperatures that cannot be supported by a commercial power supplies. With an operating temperature of -25°C to 70°C (-13°F to 158°F), the UNO-PS/1AC/48DC/60W Industrial Power Supply is ideal for use with equipment subjected to harsh environments and severe temperatures.
High Efficiency Up to 89% And No Load Power Consumption <0.3W
Compared with other products on the market, the UNO Industrial Power Supply provides excellent energy savings. With a very low no load power consumption (below .3 W) and 89% efficiency at nominal load, just a small amount of electrical energy is converted into undesired heat energy making this a very ECO friendly power supply.
Features
- Worldwide use thanks to input voltage range of 85V AC to 264V AC
- Maximum system availability through reliable power supply with 48V DC
- Maximum energy efficiency thanks to optimized efficiency over the entire operating range of the power supply unit and low idling losses
- Particularly compact: 60W of power from this narrow power supply, which is just 35mm wide
- Short-circuit-proof and idling-proof
- Automated production process
- Industrial control, automation, assembly, and test equipment
- Building control, security and surveillance, and climate control systems.
- Power countless industrial automation devices such as sensors, controllers and valves
Other reasons to choose the UNO-PS/1AC/48DC/60W
- 35mm wide DIN Rail mount narrow housing
- Voltage Isolation input/output: 4 kV AC
- LED indicator for voltage out failure: If the output voltage is below the operational range, the LED turns off.
- Protections: Short-circuit, Overload, Over voltage, Over-temperature
- High MTBF (Mean Time Between Failure) values ensure maximum availability
- IEC Protection Class II Power Supply
Primary-Switched UNO POWER Power Supply For DIN Rail Mounting, Input: 1-phase, Output: 48VDC/60W
The UNO POWER power supply unit impresses in worldwide use thanks to maximum energy efficiency. Low-idling losses and the high degree of efficiency save energy. Thanks to its high power density, the UNO POWER power supply unit is the ideal solution, particularly in compact control boxes.
Width: 35mm / 1.37"
Height: 90mm / 3.54"
Depth: 84mm / 3.31"
Share
Low stock: 2 left
View full detailsCollapsible content
More Information
INPUT VOLTAGE: 85-264 VAC
OUTPUT POWER (WATTS): 60W
OUTPUT VOLTAGE: 48V
RATED CURRENT: 1.25A
WORKING EFFICIENCY: 89%
PRODUCT CLASS: Industrial/Hardened
OPERATING TEMPERATURE RANGE: -25°C to 70°C (-13°F to 158°F)
MOUNT TYPE: DIN-Rail